🇬🇧

Arma Hobby Hayate in 1/72 Scale

Résumé en français

Claudio Moura do Nascimento a réalisé une maquette au 1/72 du Nakajima Ki-84 Hayate d'Arma Hobby, représentant une version Otsu du Hiko Dai 104 Sentai photographiée à Ota, au Japon, en 1945. L'article analyse en détail les marquages historiques, les couleurs des différentes escadrilles (Chutai), ainsi que l'attribution de cet appareil au capitaine Yoshitaka Kusano. La maquette a été peinte avec des acryliques Gunze et des vernis MRP, complétée par des effets de patine réalisés à l'huile et aux pastels.


IMG_2907.JPG

Another fine Hayate model in 1/72 scale,  this time built from the Arma Hobby kit by Claudio Moura do Nascimento from Brazil, representing one of the kit markings options as an Otsu aircraft of Hiko Dai 104 Sentai photographed at Ota, Japan in 1945. The Otsu variant intended for bomber interception and ground attack sorties had the 12.7mm cowling weapons replaced with Ho-5 20 mm cannon and is distinguished by different cowling vents, a detail addressed in the Arma Hobby kit. 

 
A history of this interesting unit may be found at the Arma Hobby website but the painting and markings section is a little misleading. This is the same aircraft featured on the Brian Knight box art of the Revell Hayate kit of 1965, although the fin tip trim was then interpreted as natural metal. 

IMG_2917.jpg

The Chutai colour sequence for this unit is confused with two different sequences being reported over time. In his 1978 listing in Koku Fan magazine Minoru Akimoto recorded an untypical sequence of white for the Sentai Hombu (HQ Flight), red for 1 Chutai, yellow for 2 Chutai and blue for 3 Chutai.  In 1989 this red, yellow, blue sequence was repeated in FAOW # 19 on Hayate in and in 1997 in Model Art Extra # 493 in 1997. The late Dr Izawa reported the same sequence although a profile caption in his updated 2022 book* reported the sequence as white for 1 Chutai, red for 2 Chutai and yellow for 3 Chutai. The Arma Hobby website article attributes this aircraft to 2 Chutai leader Lt Mitsuo Tomiya. However Chutai leaders usually had fuselage bands painted in the Chutai colour and as Tomiya had been killed at Linxi, Manchuria on 11 August 1945 it seems unlikely that his aircraft survived to be flown to Ota in Japan and photographed there after hostilities had ended  To further complicate the issue one Japanese online source asserts that the Chutai positions were later changed to reflect the seniority of the Chutai leaders with 3 Chutai being re-designated as 1 Chutai. The Gakken book on Hayate mentions that Chutai designations were changed in the closing phase of the war, whilst an article on the unit in the Japanese Scale Aviation magazine (# 32 July 2003) states that this change occurred in July 1945.

This aircraft carried the name 'Mashiki' 益城 in two small white Kanji characters on the starboard fuselage side. The same online source asserts that all the unit's aircraft displayed single character names except for the 3rd Chutai which displayed two character names reflecting the pilot's home region. For this reason it seems probable that this was the aircraft of 3 Chutai leader and Hikotai leader from January 1945 Capt Yoshitaka Kusano (草野 喜孝), as indeed attributed in the 2003 Scale Aviation magazine article. The broad white fuselage band perhaps represented his status as Hikotai leader. 
 
IMG_2910.JPG
 
The Sentai insignia represented '104' and was in red (outlined white on some camouflaged aircraft) for all Chutai with Chutai colours applied to spinner, fin tip and wing tips. The wing tip Chutai colours are confirmed by a photograph showing a distant line up of the unit's aircraft. In addition to interception sorties against the B-29 raids on Manchurian targets the unit was finally active in ground attacks against enemy armour and transport during the Soviet invasion using 'Ta Dan' cluster bombs.
 
It is apparent that the unit operated aircraft in the three typical schemes for Hayata - dark blue green over natural metal, olive green/brown over yellowish grey and in overall natural metal. Claudio used Gunze (GSI Creos) acrylics to paint the model, with MRP varnish. Weathering effects were achieved with oil paints and pastel chalk. Humbrol aluminium was used to apply the metallic effects.

With special thanks to Claudio for sharing these images of his Arma Hobby Hayate model which might easily be taken for a larger scale than 1/72! And also special thanks to Mr Keishiro Nagao of Lifelike Decals for kindly providing reference materials about this unit. 

* The Imperial Japanese Army Fighter Group, Dainippon Kaiga, 2022 


Source : Aviation of Japan 日本の航空史 — Straggler 脱走兵

Aucun commentaire:

Enregistrer un commentaire

Merci pour votre intérêt pour Cocardes !